Description

Eaton 93E XL UPS

The Eaton 93E XL UPS is a three phase online UPS, with power ratings from 10 – 40 kVA.  The UPS is available in tower form factor. The UPS includes internal batteries with extended runtime design to provide extremely compact footprint for sites with space limitations. This UPS comes with power factor 0.9

Key technologies: Eaton Hot Sync®, ABM battery management

Applications: Suitable for commercial buildings, medium to larger enterprise data centers. For safety, energy efficiency and a low-carbon future

Compliance with standards: CE, RoHS

Brochure: Download 93E XL UPS brochure

 

Applications:

• Data Center
• Manufacturing
• Commercial Buildings

• Telecom
• Healthcare

Minimizing Total Cost of Ownership
The 93E XL is the clear choice if you’re seeking to maximize
your return on investment (ROI). Delivering the lowest TCO of
any UPS in its class, the 93E XL offers a unique blend of energy,
space and installation savings

Extremely compact footprint
• Internal battery design with extended runtime design to save
footprint, no extra battery cabinet needed.
• Pre-installed batteries to simplify setup and lower costs
• Internal maintenance bypass switch

Ease of installation
• Pre-installed battery modules to minimize installation costs
and improve reliability
• Internal maintenance bypass switch (MBS) as standard to
avoid additional installation cost

Flexible and scalable runtime
• Delivers up to almost 30 minutes of backup time for 40kVA in a
single frame
• Increase backup time by adding more battery modules
• Provides greater runtime at lower costs

Maximum availability
Eaton 93E XL UPS has been designed to maximize availability
at both the facility and IT layer. The 93E XL design and Eaton’s
patented technologies provide a high level of resiliency while
Eaton’s Intelligent Power Software (IPM) allows enhanced
monitoring and load shedding capabilities.

True reliability
• Patented Powerware Hot Sync® paralleling technology
eliminating single point of failure
• Active power factor correction (PFC) provides 0.99 input
power factor and <5% ITHD
• Optimized for protecting modern 0.9 p.f. rated IT equipment
• Factory system tested solution for enhanced reliability

Minimize downtime
• Slide out battery trays for easy replacement
• Washable dust filters
• Easy CapacityTest allow the 93E XL to test its entire PowerTrain
without the need of an external load bank.

Cloud and Virtualization Ready
• Utilizing Eaton’s Intelligent Power Manager 93E XL integrates
with leading virtualization and storage platforms, and allows
users to view, monitor and administer physical and virtual
servers, UPSs, PDUs and other power devices, from a single
pane of glass.
• Simple load-shedding policy-based for extending backup
time in case of undesired events. A 50% drop in load
equates to up to 250% more battery runtime.

User Interface
• Large LCD graphically displays UPS status and offers easy
access to measurements, controls and settings.

Connectivity
• With Eaton® Mini-Slot connectivity cards, you can monitor,
manage and remotely shutdown UPSs across the network.
• Network Card–MS Web/SNMP Card allows you to connect
your 93E XL UPS directly to the Ethernet network and the
Internet.

• Network and MODBUS Card-MS provides remote monitoring
of a UPS system through a Building Management System
(BMS) or Industrial Automation System (IAS).
• Relay Card-MS provides an RS232 port and/or dry-contact
interface between your Eaton UPS and any relay connected
interface

TECHNICAL SPECS. 

Power
Ratings 40kVA/36kW
Topology Double-conversion online UPS
Operating frequency 50/60 Hz (40 to 72 Hz)
Input power factor >0.99 typical
Input current distortion ≤5% THD

Electrical input
Nominal input voltage 400/230V, 4 wire (380/415V selectable)
Input voltage range -15%, +20% from nominal (400V) at 100% load
without depleting battery

Electrical output
Nominal output voltage 400/230, 4 wire (380/415V selectable)
Output voltage regulation ±1% Static; <5% dynamic at 100% resistive load
change, <20 ms response time

Battery
Battery 432V (216 Cells * 6 strings(max),
Default with internal batteries)
Charging method ABM Cyclic Charging
General
Efficiency >98% High-efficiency mode
>94% Double-conversion mode
Overload 150% for 1 minute, 125% for 10 minutes,
>150% for 150ms
UPS bypass Automatic on overload or UPS failure
Parallel technology Hot Sync® Technology
Dimensions W x D x H (mm) 600 x 800 x 1876
Cabinet rating IP20 with standard washable dust filters

Weights with 6 strings
40kVA 790kg

Communications
Display Graphical LCD with blue backlight
LEDs (4) LEDs for notice and alarm
Audible alarms Yes
Communication ports (1) RS-232, (1) USB, (1) EPO
Communication slots (2) Mini-slot communication bays

Environmental
Operating temperature 0ºC to +40ºC
Batteries recommended max. +25ºC
Storage temperature -25ºC to +55ºC without batteries
+15ºC to +25ºC with batteries
Relative humidity 5-95%, non-condensing
Audible noise 10kVA ≤55 dB(A) at 1m typical

40kVA ≤62 dB(A) at 1m typical
Altitude <1000m at +40°C

Certifications
EMI standards EN55022/EN55024
EMC compliance IEC 62040-2
Quality ISO 9001: 2000 and ISO 14001:1996
Communication accessories
Network-MS Web/SNMP Card
Modbus-MS Web/SNMP and Modbus Card
Relay-MS Relay (Dry Contact) Card -DB9 Connection
Industrial Relay Relay (Dry Contact) Card -Terminal Connection
116750224-001 Environmental Monitor Probe (EMP) kit (need to plug
into Web/SNMP Card or Web/SNMP and Modbus
Card to work

For Pricing 

Contact us
Feel free to ask any questions you may have in mind, or to request a quote.
We look forward to hearing from you.