ABB PowerValue 11RT G2 6kVA / 6000W UPS ABB-PV11RTG2/6 Online

226,000.00

Description

ABB UPS PowerValue 11RT G2 6 kVA

Product Image

PowerValue 11 RT G2 IEC

The single-phase UPS for critical IEC applications

ABB’s PowerValue 11 RT G2 IEC is a double-conversion online UPS that guarantees up to 10 kVA of clean, reliable power for your critical single-phase applications. As well as maintaining power to your servers, point-of-sale terminals, workstation clusters, routers, switches, hubs and sensitive electronic equipment, the PowerValue 11 RT G2 IEC also conditions incoming power to eliminate spikes, swells, sags, noise and harmonics.

The PowerValue 11 RT G2 IEC can be used as a standalone UPS device or installed into a standard 19″rack configuration, with connectivity options available for each. Three units of the 6 or 10 kVA models can be configured in parallel to provide redundancy or to increase the systems total capacity up to 30 kW. All units can be fitted with up to four battery modules to extend runtime.

 

TECH SPECS

GENERAL DATA
G2 6kVA
Output rated power 6’000W
Output power factor 1.0

Parallel configuration Yes, up to 3 UPS
Inbuilt batteries No

INPUT
Nominal input voltage 208/220/230/240 VAC
Input voltage tolerance 100-276 (load dependent)
Input voltage tolerance <3% with full resistive load
Input current THDi 45-55Hz / 54-66Hz (extendable
to 40~70HZ at load < 60%)

Power factor ≥0.995
OUTPUT
Rated output voltage 208/220/230/240 VAC
Voltage tolerance ±1% (referred to 230V)
Voltage distortion <1% linear load, <5% non linear load
Overload capacity (linear load) on inverter 10m: 102-125% load
30s: 126 to 150% load
500 ms: ≥ 150% load

Nominal frequency 50 or 60 Hz
Crest factor 3:1 (load supported)

EFFICIENCY
Overall system efficiency Up Up to 95%
In eco-mode Up to 98%

ENVIRONMENT
Protection rating IP20
Storage temperature UPS: -25°C to 60°C; Batteries: 0°C to 35°C
Operating temperature 0°C to 40°C
Relative humidity 0% to 95%
Altitude (above see level) 1000m without derating

BATTERIES
Type VRLA (valve regulated lead-acid)
Recharge time (inbuilt batteries) 3h to 90%
Charging current 0-12 A adjustable

COMMUNICATIONS
User interface LCD display
Optional communication cards SNMP;ModBus;AS400;Environmental monitoring sensor probe

STANDARDS
Safety IEC/EN 62040-1
EMC IEC/EN 62040-2
Performance IEC/EN 62040-3
Manufacturing ISO 9001:2015, ISO 14001:2015, OHSAS 18001

Reviews

There are no reviews yet.

Be the first to review “ABB PowerValue 11RT G2 6kVA / 6000W UPS ABB-PV11RTG2/6 Online”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.